IEC62275 standard
2020-11-16 17:16
66
As a leading global manufacturer of quality, high performance cable management products for over 80 years, our extensive fastening and fixings portfolio reflects our long-standing industry expertise. Cable ties from the inside-serrated, the outsideserrated as well as our metal cable ties have been tested in accordance with the international cable tie standard IEC 62275 (Cable management systems -
Cable ties for electrical installations). This standard supersedes EN50146: 2000 and all HellermannTyton products fully comply with the requirements.
Cable ties manufactured from the standard material Polyamide 6.6(PA66), heat-stabilised Polyamide 6.6 (PA66HS), UV-stabilised Polyamide 6.6(PA66W) and Stainless Steel grades SS304 and SS316 have been successfully tested and approved.
The IEC 62275 standard includes the following tests:
• Installation test on minimum and maximum specified bundle diameters
• Installation test at minimum specified installation temperature
• Impact test at minimum specified operating temperature
• Minimum tensile strength (in the standard this is described as the
loop test)
• Loop tensile test after heat ageing at the specified operating
temperature
• Loop tensile test after heat cycling at the minimum and maximum
operating temperatures
• Loop tensile test after humidity and heat cycling at the minimum and
maximum operating temperatures
• Contribution to the spread of fire on both the actual product and test
substrate (tissue paper)
• Loop tensile and visual tests after exposure to ultraviolet light radiation
for PA66W ties
• Resistance to corrosion (dependent on material)
• Loop tensile test after vibration test for metal cable ties
- Previous：Optimum storage conditions for cable ties made of Polyamide (PA)
- Next：No more