Material:
Nylon 66, 94V-2, certificated by UL. Acid and corrode resisting,insulate, not to age. with imported double sided tape on the back.
How to use:
remove the cover of the adhensive and stick the piece properly,then put in cable tie for using
Application:
used where hole-drilling is not allowed, easy and time-saving .
OEM service:Support different customized packing
For Free : Design new sticker label with your own LOGO
usage:
1. The sticking surface must be clean, uniform and dry. Do not use on concrete, rough, loose surfaces.
2. If the surface is not clean, you need to wipe the installation surface clean with detergent.
3. Carefully remove the backing paper when using, and then quickly put the product into the proper position. Press hard to maintain full contact.
4. Pasted products are affected by the size of the bottom area, temperature and pressure holding time.
5. The best application temperature for sticking glue is (6°C-35°C). Try to avoid using it at a lower temperature than this, which will cause the paste to be too hard and unable to effectively wet.
| ITEM.NO. | mm | mm | mm | cm | pcs/ctn | kg |
| HRC-20 | 20x20 | 6.1 | 5 | 52x35x36 | 20000 | 20/18 |
| HRC-25 | 25x25 | 7.5 | 6.2 | 52x35x36 | 10000 | 19/17 |
| HRC-30 | 30x30 | 8.7 | 6.4 | 54x33x32 | 6000 | 18/16 |
| HRC-40 | 40x40 | 6.4 | 10.8 | 54x33x32 | 3000 | 17/15 |
